跳至主要内容

解决Zigbee2MQTT升级后京鱼座无线开关失效的问题

HomeAssistant入门之设备管理控制 有介绍京鱼座四件套设备对 Zigbee2MQTT 的接入，主要是外挂了 jingxuan.js 文件。
这个套件虽然烂，但我改装了无线开关：废物利用之京鱼座ZigBee无线开关，用起来还可以，算是榨出了些价值。

可是，最近 Zigbee2MQTT 更新后无线开关就失效了，按钮没有响应，我重新连接 zigbee 也不好使，去掉了外挂 jingxuan.js 也不行。
一直没搞懂，几年了，为什么 Zigbee2MQTT 对这几件套支持的不好，还没人改？是我用的不对吗？看 https://github.com/Koenkk/zigbee-herdsman-converters/tree/master/src/devices 这里，最近还有更新，可是无线开关就是连接后不好使。

研究了一下 Zigbee2MQTT 对新设备的支持，发现有些不一样了：
https://www.zigbee2mqtt.io/advanced/support-new-devices/01_support_new_devices.html

前面注释的是之前文件的一些常量，更换成 Zigbee2MQTT 更新的，其他不变，再重启下就好了。

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
 
//const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
//const tz = require('zigbee-herdsman-converters/converters/toZigbee');
//const exposes = require('zigbee-herdsman-converters/lib/exposes');
//const reporting = require('zigbee-herdsman-converters/lib/reporting');
//const extend = require('zigbee-herdsman-converters/lib/extend');
//const e = exposes.presets;
//const ea = exposes.access;

const {} = require('zigbee-herdsman-converters/lib/modernExtend');
// Add the lines below
const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const ota = require('zigbee-herdsman-converters/lib/ota');
const utils = require('zigbee-herdsman-converters/lib/utils');
const globalStore = require('zigbee-herdsman-converters/lib/store');
const e = exposes.presets;
const ea = exposes.access;

const fzLocal = {
    WSZ01_on_off_action: {
      cluster: '65029',
      type: ['attributeReport'],
      convert: (model, msg, publish, options, meta) => {
          const clickMapping = {0: 'release', 1: 'single', 2: 'double', 3: 'hold'};
          return {action: `${clickMapping[msg.data[1]]}`};
      },
  },
      
};

module.exports = [
    // 人体传感器
    // 人传配对方式：长按重置键，网关发现后，每隔一秒按一次重置键
    {  
        zigbeeModel: ['wall pir'],
        model: 'PRZ01',
        vendor: 'J.XUAN',
        description: 'Human body movement sensor',  
        fromZigbee: [fz.ias_occupancy_alarm_1_with_timeout, fz.battery], 
        toZigbee: [], 
        exposes: [e.occupancy(), e.battery_low(), e.battery()], 
    },
    // 无线开关JD-SWITCH02
    {
        zigbeeModel: ['JD-SWITCH\u000002'],
        model: 'WSZ01',
        vendor: 'J.XUAN',
        description: 'Wireless switch',
        supports: "action, battery, linkquality",
        fromZigbee: [fzLocal.WSZ01_on_off_action,fz.battery],
        toZigbee: [],
        exposes: [e.action(['release', 'single', 'double', 'hold']), e.battery()],
    },
    // 插座
    {
        zigbeeModel: ['00090bdc'],
        model: 'SPZ01',
        vendor: 'J.XUAN',
        description: 'plug',
        fromZigbee: [fz.on_off, fz.electrical_measurement, fz.metering],
        exposes: [e.switch(), e.power(), e.power_outage_memory().withAccess(ea.STATE_SET), e.energy()],
        toZigbee: [tz.on_off, tz.SPZ01_power_outage_memory],
        configure: async (device, coordinatorEndpoint, logger) => {
            const endpoint = device.getEndpoint(1);
            await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff', 'haElectricalMeasurement']);
        },
    },
]


source https://mianao.info/5318c801/

评论

发表评论